First, we need to open and separate the razor top cover, and use a small brush to brush off the debris between the blade body and the top cover. Zhenbo Shanghai razor processing manufacturer pointed out that we can first open the stubble compartment of the shaver, remove the upper cover of the stubble compartment, and pull the upper cover up together with the bright silver metal device when taking it out. , and clean up the stubble. When cleaning stubble, the blades on the shaving net are all removable, including the small shiny silver metal fittings that connect the upper and lower parts of the stubble compartment. But keep in mind the shape of the location where this silver metal device is placed, it will be used for restoration.
Next, we can use a small brush to clean the beard debris from the motor part of the blade. Zhenbo Shanghai razor OEM manufacturer pointed out that you can press the middle buckle of the cutter head to push the cutter head out of the blade holder guard. After separating the blade holder guard, use a small brush to clean the blade holder guard.
Separate the filter screen and cutter head from the bracket, take out the cutter head from the filter screen, and use a small brush to clean the filter screen and cutter head respectively.
On the back of the shaver, forcefully push the back of the shaver toward the charging port, so that the shaver will be divided into two parts by the middle of the side of the shaver, so that the entire back shell of the shaver is completely separated from the whole. . At this time, the lower part of the stubble bin and the motor can be separated from the cutter body without disconnecting the connection line, so that it is convenient for us to apply oil or clean the various crevices and corners of the shaver.
Next up is the inside of the shaver. There are 4 hex screws on the front of the shaver, use the corresponding hex wrench prepared in advance to unscrew them counterclockwise. The upper two screws are longer than the lower two screws, please pay attention when reassembling. Remove the shaver front panel and bright silver switch retaining guard.
